A-61601 June 2012
2-5
7. Secure the power cord and USB cable into the routing channel on
the back of the scanner.
Turning on the
scanner
1. If your scanner has a toggle power switch, momentarily press the
toggle button on the back of the scanner to turn the scanner on;
otherwise press the button on the back of the scanner to the On (|)
position.
When you turn on the scanner, the LED indicator on the front of the
scanner will flash as the scanner goes through a series of self tests.
Please wait while the operating system synchronizes the scanner
with the installed software.
When the installation process is complete and ready to scan, the
LED indicator will stop flashing and stay green.
2. When scanner setup is complete and you are ready to scan photos,
insert the USB software dongle in a USB port on your PC. Wait for
the USB software dongle to be recognized by your PC.
NOTE: DO NOT LOSE THE USB SOFTWARE DONGLE! THERE IS A
FEE TO REPLACE THE DONGLE. IT IS RECOMMENDED
THAT YOU ATTACH THE DONGLE TO THE SCANNER USB
CABLE.
