KoamTac SMARTSLED KDC400 Series, User Manual

Page: 65 / 231

KDC User
YOUR
KDC
65
NFC Config – KDC350N/KDC400N
NFC Power
 Turning NFC Power on or off

Options: Enable/Disable
Data Format

Options: Data only/Packet data
UID Only

Enable or Disable UID Only menu

The KDC only sends UID data to the host device when the KDC is in UID Only
mode. If Data format is ‘Data Only’ or HID mode, the KDC changes the UID hex
values to ascii string and sends this data to the host device. If Data format is ‘Packet
Data’, the KDC only sends UID hexa values with NFC/RFID packet format.

KDC350N/400N supports the following card types.
1) Mifare Desfile read.
2) Mifare 1K read.
3) Mifare Ultralight / Ultralight C
4) ISO 15693
Note