KoamTac SMARTSLED KDC400 Series, User Manual

Page: 79 / 231

KDC User Manual B
LUETOOTH
79
Discovering
KDC20/30/200/250/300/350/400 starts to search for neighboring
Bluetooth
devices if the
Discovering menu is executed. It will take about 30 seconds to finish searching and to list
available neighboring
Bluetooth devices. Another option is to enter the corresponding
Bluetooth MAC address in the KTSync Bluetooth menu, instead of waiting for the KDC to
search for neighborhood
Bluetooth devices.
Connect To
This option lets you easily connect the KDC to
Bluetooth
devices that have been either
previously registered in KTSync under the File Menu or discovered/connected from the KDC
Bluetooth
Service menu.
There could be an interoperability issue depending on the corresponding device
Bluetooth stack. The master Bluetooth device may request that you to follow the
master Bluetooth device’s security procedures, if the KDC tries to connect to the
master Bluetooth device.
HID Sync
The user may synchronize stored barcode data over HID using the HID Sync option. The KDC
will start to transmit all stored barcode data upon execution of the HID Sync option. This
option is available when KDC MFi Mode option is disabled.
Note