KoamTac SMARTSLED KDC400 Series, User Manual, Page: 51 / 231

KDC User
YOUR
KDC
51
Filter
(Opticon model only)
This menu enables the user to change the Filter mode from Normal to High for poor quality
barcodes. The default is Normal.
Timeout
In this menu, you may set the interval between scans. The timeout options are from 5
seconds up to 10 seconds. The default is 2 seconds.
Minimum Barcode Length
This option enables the user to set a barcode length from 2 characters to 36 characters
(KDC20/100/200/250/350L/410/415) or 2 characters to 48 characters
(KDC30/300/350C/420/450). It is strongly recommended that you maximize the minimum
barcode length setting to prevent possible errors.

The default minimum barcode length of KDC20/100/200/250/350L/410/415 is 4
characters.
 The default minimum barcode length of KDC30/300/350C/420/450 is as follows:
Minimum (Default) Maximum (Default)
1D Symbology
Codabar 2(4) 60(60)
Code 11 1(4) 80(80)
Code 32
Code 39 0(0) 48(48)
Code 93 0(0) 80(80)
Code 128 0(0) 80(80)
EAN-8
EAN-13
GS1 Composite
I2of5 2(4) 80(80)
Matrix 2of5 1(4) 80(80)
MSI 4(4) 48(48)
Plessey 4(4) 48(48)
PosiCode 2(4) 80(48)
GS1 Omni
GS1 Limited
GS1 Expanded 4(4) 74(74)
S2of5 Ind 1(4) 48(48)
S2of5 IATA 1(4) 48(48)
TCL39
Telepen 1(1) 60(60)
Trioptic
UPCA
UPCE0
UPCE1
2D Symbology AztecCode 1(1) 3750(3750)