KoamTac SMARTSLED KDC400 Series, User Manual

Page: 52 / 231

KDC User
YOUR
KDC
52
AztecRunes
CodablockF 1(1) 2048(2048)
Code16K 0(1) 160(160)
Code49 1(1) 81(81)
DataMatrix 1(1) 1500(1500)
MaxiCode 1(1) 150(150)
MicroPDF 1(1) 366(366)
PDF417 1(1) 2750(2750)
QRCode 1(1) 3500(3500)
HanXin Code
Postal Codes
Postnet
PlanetCode
UK Post
Mayada Post
Kix Post
Australia Post
Japan Post
China Post 2(4) 80(80)
Korea Post 2(4) 80(48)
OCR
OCR Off
OCR A
OCR B
OCR USC
OCR MICR
OCR SEMI
Image Capture
(KDC30/300/350C/420/425/450)
This option enables the user to capture an image in JPEG format in C:\myData folder. You
should enable the image capture option first, and then press the Scan button to start the
aiming. A green aiming light will illuminate and an image will be taken upon release of the
Scan button. KDC will disable the image capture option if the user presses the scan button
for 10 seconds.
Security Level
(KDC20/100/200/250/350L/410/415)
This menu enables the user to ensure an accurate barcode reading by setting the number of
times the KDC will read a barcode. Security Level is set from 1 up to 4. The higher security
level means readings are more reliable; however, some performance degradation is likely.
For poor quality barcodes, we recommend increasing the security level. The default is 2.
Auto Trigger
Once enabled, Auto Trigger enables the user to scan a barcode automatically. You may
adjust reread delay from continuous to extra-long. Auto Trigger mode always enables the
duplicate check option.
Table 4 - KDC30/300/350C/420/450 Minimum Barcode Length