KoamTac SMARTSLED KDC400 Series, User Manual, Page: 50 / 231

KDC User
YOUR
KDC
50
KDC Mode Menu
The KDC Mode Menu has two options – Normal Mode and Application Mode.
Normal
This is the default mode that provides basic barcode scanning. In normal mode, barcode
data may be manipulated directly through the KDC or through KTSync
® during the
synchronization process.
Application
This mode enables the user to run the user application created by the Application
Generation Tool, as described in
Chapter 7 Application Generation.
View Data Menu
This menu option enables the user to view and/or delete barcodes stored in the KDC. In the
case of the KDC20/30, you may delete the last scanned barcode by pressing the DELETE
button on the right side of the unit.
Set Barcodes Menu
This menu lists all the barcode symbologies supported by the KDC and enables the user to
select the barcode symbologies to be scanned. For maximum scan performance, you should
select only the symbologies that you will be scanning. Please refer to
11. Appendix – 11.1
Symbologies for a detailed listing of symbologies supported by the KDC.
Code Options Menu
The KDC supports various Code Options, including Transmission of Start and Stop
Characters, Symbology Conversion, Verification of Optional Check Character, and
Transmission of Check Digit. Please refer to
11. Appendix A – 11.2 Code Options for a
detailed explanation of each option.
Scan Options Menu
Scan Angle
(Opticon model only)
This option enables the user to configure the laser beam angle to the barcode. There are
two options for scan angle: Wide and Narrow. Wide is 54
o and Narrow is 27 o . The default is
wide.
Press the Delete button to delete the last
scanned barcode.
Figure 12 - Delete Function in KDC20/30