KoamTac SMARTSLED KDC400 Series, User Manual

Page: 54 / 231

KDC User
YOUR
KDC
54
-
This optional index would be added if data format is “Packet Data”.
-
4 bytes index would be added before “@” when responding to “p”
command.
-
4 bytes index plus “@” character would be added after checksum byte if
the user scans a barcode and wedges to the host.
Data Editor
The KDC provides various data editing options.

Prefix - Enables you to add a prefix to scanned data that may then be stored in the
KDC memory or wedged to the host. The Prefix format must be defined in the Data
Format menu section of KTSync. The maximum length for a Prefix is 11 characters.
This Prefix option is different from the Prefix option in KTSync, which attaches
the prefix to data during synchronization.
The user may also define the prefix by scanning characters defined in Appendix
C. as shown below in the special barcodes.
Note
Note
Note