KoamTac SMARTSLED KDC400 Series, User Manual

Page: 111 / 231

KDC User Manual A
PPLICATION
G
ENERATION
111
Data Filter Settings
When the user select Enable data filtering, the user must click on the Settings button to
select the Data filter setting. The options for the Data filter settings are the same for Step1,
Step 2, and Step 3.

Barcode Type
This field enables the user to select the type of barcodes the KDC will collect. When
the user clicks on the box, Select Symbols is enabled. A listing of the symbologies
supported by the KDC will display. To select a barcode symbology, click on the box
associated with the symbology.

Minimum Data Length
This field enables the user to define the minimum length of the scanned barcode.
The length may be between 2 and 36 (KDC350L), 2 and 48 (KDC350C) characters. If
the user scans a barcode that has a length of less than the defined length, the
barcode data is not collected.
The default KDC minimum barcode length defined in scan option is 4.
Therefore, users should change KDC minimum barcode length to 2 or 3
to define minimum data length to 2 or 3.
Figure 33 - Data Filter Settings
Note