KoamTac SMARTSLED KDC400 Series, User Manual, Page: 58 / 231

KDC User
YOUR
KDC
58
The user may also delete or display a current suffix by scanning the following
special barcodes.
KDC20/100/200/250/300/350L/410/415
Delete Suffix
Display Suffix
KDC30/350C/420/425
Delete Suffix
Display Suffix

AIM ID - Enables the user to add AIM ID to scanned data, which may then be stored
in the KDC or wedged to the host. AIM ID must be defined in the Data Format
menu section of KTSync. AIM ID is added to the end of a Prefix or Suffix.

Partial Data: Enables the user to store and/or transfer partial data. The user defines
the start position and number of characters to be stored and/or transferred.

Select the
x
characters from
y
position

Set Partial Data Start Position to
y
, Partial Data Length to
x,
Partial Data
Action to Select

Partial Data Length
0
selects all characters from
y
position.

Erase the x characters from y position

Set Partial Data Start Position to y , Partial Data Length to x, Partial Data
Action to Erase

Partial Data Length 0 erases all characters from y position.
Note