34
When all necessary objects and cameras are added, press
Save and reload floor plan
button so
everything starts functioning.
Launching visualization on touch device (iPad in this case)
•
Make sure your iPad is connected wirelessly to the Logic Machine (either through
separate access point or directly to Logic Machine’s USB WiFi adapter).
•
In the browser enter Logic Machine’s IP (default 192.168.0.10).
•
Click on the User
mode visualization
or
Touch visualization
icon.
•
Save the application as permanent/shortcut in your iPad
Launching visualization on PC, iPad or any other touch device with large enough screen
•
Make sure your PC/touch device is able to access Logic Machine and enter it’s IP in the
browser (default 192.168.0.10).
•
Click on the
User Mode Visualization
and enter the “floor” you want to see.
Summary of Contents for LogicMachine3 Re:actor
