49
Script name
– the name of the script
Sleep interval (seconds)
– interval after which the script will be executed.
Active
– specifies whether the script is active (green circle) or disabled (red circle)
Category
– a new or existing name of the category the script will be included. This will
not affect on script action, helps only by grouping the scripts and watching by categories
in
Tools
script listings page
Description
– description of the script
Scheduled
Script name
– the name of the script
Minute
– Minute
Hour
– Hour
Day of the month
– Day of the month
Month of the year
– Month of the year
Day of the week
– Day of the week
Active
– specifies whether the script is active (green circle) or disabled (red circle)
Category
– a new or existing name of the category the script will be included. This
will not affect on script action, helps only by grouping the scripts and watching by
categories in
Tools
script listings page
Description
– description of the script
Summary of Contents for LogicMachine3 Re:actor
