KNX LogicMachine3 Re:actor, Product Manual

Page: 41 / 160

41
1.1.2. Analog output
Analog output can be used either as 1byte (0-100%) or 2byte (voltage) output.
Name
– name of the port
Link to object
– group address to link the object with. By pressing the button, the
field will be automatically filled with the next free group address.
Status object – status object group address.
Lock object
– lock object group address
Write to bus – defines either to write or not to bus on value change
Mode [0-100%(1byte); Voltage(2byte)]
– output mode
Minimum voltage – minimum voltage value
Maximum voltage
– maximum voltage value
Transition time (seconds) – transition time between two values
Comments
– comment of the object