57
Parameter setting
Sensor KNX AQS/TH-UP Touch
• Version: 23.10.2018 • Technical changes and errors excepted.
Choose if you would like to use the return release.
Choose if input objects should be used.
Set what should appear on the display.
The following table contains a list of other selection options.
Type of temperature target value display
(only for active thermostat display)
• Current target value
• Basic setpoint
• Basic setpoint as bar chart
• Basic setpoint as bar chart with count
• Basic setpoint as bar chart with range
Basic setpoint as bar chart with range and
count
Display duration in seconds for
Temperature controller display
2...240; 5
Use object "Return approval"
No •
Yes
Object evaluation
• 1= Allow return | 0=Return not allowed
• 1= Allow return | 0=Return not allowed
Object value prior to initial communication
0 • 1
Use input objects
No • Yes
Content line 1 (small font size)
• display nothing
• internal temperature
• other selection options
Content line 2 (large font size)
• display nothing
• CO2 internal reading
• other selection options
Content line 3 (small font size)
• display nothing
• relative humidity internal
• other selection options
Summary of Contents for AQS/TH-UP Touch
Page 2: ......
