Knick Stratos Pro A401B CONDI, User Manual

Page: 39 / 160

39
Menu Structure of Modes and Functions
Manual activation of HOLD mode, e.g. for sensor replacement.
The signal outputs behave as configured (e.g. last measured value, 21 mA)
Configuring parameter set A
Configuring parameter set B
Display of measured values for validation (simulators)
Current source, output 1
Current source, output 2
Relay test
Controller: manual specification of controller output
Activating the IrDA interface
Specifying access codes for operating modes
Reset to factory setting
Enabling an option via TAN



(Access via
code, factory
setting:
5555)
Calibration with calibration solution
Calibration by input of cell factor
Zero calibration
Product calibration
Adjustment of temperature probe
Display of calibration data
Display of sensor data
Self test: RAM, ROM, EEPROM, module
Logbook: 100 events with date and time
Display of direct, uncorrected sensor signals
Display of software version, model designation, serial number


Pressing the menu key (down arrow) opens the selection menu.
Select the menu group using the left/right arrow keys.
Pressing enter opens a menu item. Press meas to return.
Controller
parameter display
(if configured)
after 60 s after 60 s
TAG display CLK display
Meas. mode
(main display
selectable)