Electric motors Size 63 - 225 ATEX / IECEx
Operations
42
2021-05-31
Pos : 7. 2 / KN2006- SM/Bedienung/ 001 1 Bedi enung _Tit el @ 9\mod_1144402040153_1. doc @ 86490
7 Operations
Pos : 7. 3 / KN2006- Proj ekt e/H erfor der El ektromot oren- Wer ke/ Bedienung/ 1. 1 Allgemei nes @ 59\ mod_1203412166172_1. doc @ 1038421
7.1 General information
During operation no staff are required in the machine area or in the
direct vicinity to operate it.
Operation is performed using the overall plant control unit
(
Operating manual for the complete plant).
Pos : 7. 4 / KN2006- SM/ nL---------- Abschnit tsende ---------- @ 8\ mod_1141997892953_0. doc @ 75471
Pos : 7. 5 / KN2006- SM/Bedienung/ 007 1. 1 Stillsetz en im Notf all_Tit el @ 9 \ mod_1144405047456_1. doc @ 86610
7.2 Shutting down in an emergency
Pos : 7. 6 / KN2006- SM/Bedienung/ 007 1. 1 Stillsetz en im Notf all --> Anl age und größ ere M asc hine @ 9\ mod_1144432835796_1.doc @ 86788
In danger situations machine movements must be stopped as
quickly as possible and the energy supply has to be switched off.
Shutting down in an emergency
In case of danger proceed as follows:
1.
Trigger an emergency stop immediately.
2.
Remove any people from the danger zone and administer first
aid.
3.
Alert a doctor and the fire services.
4.
Inform the responsible party at the location.
5.
Switch off the master switch and secure it to prevent it from
being switched back on.
6.
Keep access routes for emergency vehicles clear.
After emergency measures
7.
If the seriousness of the emergency requires it, inform the
respective authorities.
8.
Have specialist staff remedy the fault.
WARNING!
Risk of death from switching on prematurely.
When switching back on there is a risk of fatal
injury for all people in the danger area.
Therefore:
– Before switching back on make sure that there
is nobody in the danger area.
9.
Before re-starting check the plant and make sure that all
safety devices are installed and fully functional.
Pos : 8.1 /F I/.......... Seitenumbr uch .......... @ 0\mod272_1.doc @ 1522