Electric motors Size 63 - 225 ATEX / IECEx
Installation and commissioning
2021-05-31
33
Pos : 6. 12 /KN 2006-SM /I nst allati on & I nbetriebnahme/003 1. 1. 0 El ektrisc he Anl age_G ef ahr! @ 9\ mod_1144397463440_1. doc @ 86395
Electrical equipment
DANGER!
Danger to life from electrical current.
There is a risk of fatal injury from contact with live
parts. Electrical components which are switched on
can carry out uncontrolled movements and cause
serious injuries.
Therefore:
– Before starting work switch off the electrical
power supply and secure it to prevent it from
being switched back on.
Pos : 6.13 /KN 2006-SM /nL---------- Abschnitts ende ---------- @ 8\mod_1141997892953_0.doc @ 75471
Pos : 6. 14 /KN 2006-SM /I nst allati on & I nbetriebnahme/003 1. 1. 0 Sic hern g egen Wiedereinschalt en @ 9 \mod_1144397709746_1. doc @ 86412
Securing the machine to prevent it
from being switched back on
DANGER!
Risk of death from switching on without
authorisation!
When performing installation there is a risk that the
energy supply will be switched on without
authorisation. This puts the life of people in the
danger area at risk.
Therefore:
– Before beginning all work shut off all energy
supplies and secure them to prevent them from
being switched back on.
Pos : 6.15 /KN 2006-SM /nL---------- Abschnitts ende ---------- @ 8\mod_1141997892953_0.doc @ 75471
Pos : 6. 16 /KN 2006-SM /I nst allati on & I nbetriebnahme/003 1. 1. 0 Gr undl egendes _Warn ung! @ 9\ mod_1144396463455_1. doc @ 86388
Improper installation and
commissioning
WARNING!
Risk of injuries from improper installation and
commissioning.
Improper installation and commissioning can cause
serious personal injury and material damage.
Therefore:
– Before starting work make sure there is
sufficient space for performing the installation
work.
– Handle open, sharp-edged parts with care.
– Keep the installation area clean and tidy. Loose
parts and tools stacked on top of each other or
parts and tools left lying around are potential
sources of accidents.
– Fit parts properly. Adhere to the stipulated
tightening torque values for screws.
– Secure parts to prevent them from falling or
toppling.
Pos : 6.17 /KN 2006-SM /nL.......... Sei tenumbr uch .. ........ @ 8\mod_1141998334703_0.doc @ 75489
