Electric motors Size 63 - 225 ATEX / IECEx
Removal
56
2021-05-31
Pos : 10.12 / KN 2006-SM/D emont age/003 1.1.0 Gr undleg endes @ 9\ mod_1144870287285_1. doc @ 89626
Improper removal
WARNING!
Risk of injury from improper removal.
Stored residual energy, sharp parts, points and
corners on and in the device or on the required
tools can cause injuries.
Therefore:
– Before starting work make sure there is
sufficient space.
– Handle open, sharp-edged parts with care.
– Keep the working area clean and tidy. Loose
parts and tools stacked on top of each other or
parts and tools left lying around are potential
sources of accidents.
– Remove parts properly. Be aware that some
parts have a heavy dead weight. Use lifting gear
as necessary.
– Secure parts to prevent them from falling or
toppling.
– In case of doubt, contact the manufacturer.
Pos : 10.13 /KN 2006-SM/nL---------- Absc hnitts ende ---------- @ 8\mod_1141997892953_0.doc @ 75471
Pos : 10.14 / KN 2006-SM/D emont age/008 1.1 Demont age --> Maschi ne --> ggf. anpas sen! (Masc hine) @ 41\ mod_1183386016255_1. doc @ 503426
10.2 Removal
Before starting removal:
◼
Switch off the machine and secure it to prevent it from being
switched back on.
◼
Physically disconnect the entire energy supply and discharge
stored residual energy.
◼
Remove fuels and consumables and residual processing
materials and dispose of them in an environmentally friendly
manner.
Then clean assembly groups and parts properly and dismantle
then in accordance with the local regulations for occupational
safety and environmental protection.
Pos : 10.15 / KN 2006-SM/ nL---------- Absc hnit ts ende ---------- @ 8\ mod_1141997892953_0. doc @ 75471
