KNAUER
P 6.1L User Manual V6890 Version 1.2
26
Installation
Next steps
Attach the front cover.
Control
The pump can be controlled externally in two ways:
Via the pin head
As part of a LAN, via the LAN connector of the router
All connectors for external control are located on the rear side of
the pump
.
The pump can also be controlled via the Control Unit. The Con-
trol Unit connector is located on the side of the device.
3. Connect the nozzle and
the funnel.
4. Push the other end of
the hose onto the noz-
zle
5
of the leak tray.
Abb. 22 Hose connected to
device
5. For the bottom device,
push the short end of
the nozzle
6
into the
opening in the collec-
tion point of the leak
tray.
6. Connect the hose to
the nozzle and lead the
second ending to the
waste bottle.
7. Place the waste bottle
below the bottom
device.
Abb. 23 Leak tray with nozzle
Procedure
Process
Figure
5
6
