KNAUER
P 6.1L User Manual V6890 Version 1.2
37
Operation
Procedure
1. Connect the device to the power supply.
2. Switch the power supply on.
3. Wait until the pump has completed the self-test.
4. Start the pump at a medium flow rate.
Next steps
Operate the pump.
Control
There are several options for controlling the device:
Chromatography software
Control Unit
App (Mobile Control)
Note
It is not possible to use two options simultaneously. If the device
is connected to the software, it cannot be controlled via Control
Unit or Mobile Control, etc.
Control with Chromatography Software
To control the device with software, you have to establish a con-
nection between the LAN port and a computer.
Devices can be controlled with e.g. OpenLAB EZChrom edition
version A.04.05 or higher, or with ClarityChrom version 5.0.2 or
higher. You find a detailed description on chromatography soft-
ware in a corresponding user manual.
Control with Control Unit
To control the device using the Control Unit, connect the cable
of the Control Unit to the device. The Control Unit is an optional
accessory. You find a detailed description on the Control Unit in
its accompanying user manual.
Control with Mobile Control
The Mobile Control is an app which can be installed on your
computer or tablet computer. To control the device using the
Mobile Control, connect the computer or tablet computer to a
wireless LAN router. You find a detailed description on the
Mobile Control in its accompanying user manual.
Meaning of the LEDs
There are three LEDs and a switch on the front of the device.
Legend
1
Left LED
2
Center LED
3
Right LED
4
Power switch
Fig. 31
LEDs and switch on the front of the device
1
2
3
4
