KMB NOVAR 2600, Operating Manual

Page: 18 / 96

NOVAR 2600 Operating Manual
Fig. 4.1: PFC Screen
4.2.1.1 Outputs & Digital Input State
There are two columns of icons indicating actual state of individual outputs (and the digital input,
optionally) on the left side of the screen. The first (left) column corresponds to the output group No. 1,
the second column corresponds to the output group No. 2.
The icons primary information is actual
output state ( the output additional information removed from
the icons for this example ) :
• … open output
• … closed output
The models with 7 and 16 outputs are equipped with one digital input too. Its state is indicated as
follows :
• … inactivated digital input
• … activated digital input
4.2.1.2 Outputs State Additional Information
Icons bear additional information of particular outputs.
Firstly, the icon design determines
the output type :
• … zero (or unknown) output; the output has zero reactive power (probably unconnected
output or with reactive power below the instrument sensitivity)
• , , … single-phase capacitors C1, C2, C3 (the number corresponds to appropriate
phase number)
•
, , … two-phase capacitors C12, C23, C31
• … three-phase capacitor C123
• , , ...single-phase chokes L1, L2, L3
• , , … two-phase chokes L12, L23, L31
• … three-phase choke L123
18
outputs
state
actual
data & status
panel
PF
gauges
actual
temperature
panel
toolbar
reactive power
deviation flags
control time
bargraph
event
indicator