klover K top, User Manual

Page: 27 / 64

27
Electrical connection
The electric connection must only be performed by qualified
technicians, in adherence with general and local safety
standards.
Check that the power supply voltage and frequency
correspond to 220V
– 50 Hz.
The device's safety is guaranteed when it is properly
connected to an efficient earthing system.
When making the electric connection to the mains power
supply, provide a 6 A
– Id 30 mA differential circuit breaker
switch with relevant breaking load. The electric connections,
including the earth connection, must be made after switching
off the electrical system. When completing the system, bear in
mind that the cables must be laid in an unmovable manner
and far from parts subject to high temperatures. During the
final wiring of the circuit, only use components with a suitable
electric protection rating.
KLOVER srl accepts no liability for injury to persons or
animals or damage to objects due to failure to connect
the heating cooker/heating stove to earth or failure to
comply with IEC specifications.
Installation and electrical connection should be carried out by
expert technicians using suitable equipment.
Connection to the mains power supply should only be carried
out after the wires have been connected to the terminal board.
Klover accepts no liability for damages caused by improper
connections or inappropriate use.