54
Maintenance of the boiler unit
The heating cooker/heating stove is equipped with a special
magnesium anode to protect the boiler unit and stainless steel heat
exchangers from corrosion caused by stray currents in the system.
This anode also protects against galvanic corrosion.
The anode must be checked at least once a year and replaced
when its diameter measures less than 15 mm.
To inspect the boiler, after having opened the
left-hand hatch on the upper frame, remove the upper cover.
To replace the anode, just unscrew it and screw-in the
new one, making sure that it does not come into contact with
the stainless steel heat exchangers.
NEVER EMPTY WATER INTO THE HEATING
COOKER/HEATING STOVE SO AS NOT TO COMPROMISE
ITS OPERATING LIFE.
MAGNESIUM ANODE
Summary of Contents for K top
