klover K top, User Manual

Page: 9 / 64

9
INTRODUCTION
Important safety instructions
Please read these instructions before installing and using the
product.

The installation and initial start-up of the heating
cooker/heating stove must be performed by skilled personnel
trained in the relevant safety standards. They will be
responsible for the definitive installation of the appliance and
its proper operation.
KLOVER srl shall not be held liable if these precautions are
not observed.

During installation of the appliance, all local regulations -
including those referring to national and European Standards
- must be observed.

Connect the flue gas outlet to a flue with the specifications
described in the Connections section of this User guide.

The appliance is not suitable for installation on a shared flue
system.

If the flue should catch fire, use appropriate fire extinguishing
equipment or call the fire brigade.

Connect the product to an earthed power socket. Avoid using
sockets controlled by switches or automatic timers.

Do not use damaged or worn power supply cables.

If a multiple socket is used, make sure that the total voltage of the
connected devices does not exceed the rated voltage for the
socket. Also make sure that the total voltage of all the devices
connected to the socket does not exceed the maximum permitted
level.

Do not use flammable substances to clean the appliance or its
parts.

Do not leave containers of flammable substances in the room
where the heating cooker/heating stove is installed.

Do not use the appliance as an incinerator or for any use other
than that for which it was designed.

Do not use different fuels to those recommended.

Do not use liquid fuels.