Klimor EVO-S COMPACT, Operation And Maintenance Manual

Page: 45 / 88

43
F7 and F9 minipleat filters
F7/F9 minipleat filters are filters made of non-woven fabric
formed into filter packets in galvanized sheet metal casing;
they are designed for secondary air treatment.
F7/F9 minipleat filters are 98mm deep. The frame for moun-
ting in a guide has a dimension of 25mm.
The filters are mounted in guides with seals and a slat clamp
that is locked on an eccentric connection mechanism (Fig. 29).
Separators from the metal section with seals are mounted
between the filters.
When replacing the filters, it is recommended to replace the
self-adhesive seal fixed inside the guide.
F7/F9 minipleat filters are not to be regenerated and must
be replaced with new ones.
The dimensions of the filters used are specified in the KT
certificate.
Table 13.
Dimensions and quantities of F7/F9 minipleat filters
Size
EVO W H pcs Size
EVO W H pcs
[mm] - [mm] -
5100 600 350 1 0600 599 650 2
3200 424 350 2 0700 465 650 3
0300 424 450 2 5800 465 800 3
0400 549 450 2 0010 532 800 3
2500 599 550 2 5310 565 1050 3
5610 473 1150 4
4.2.3 Bag filters
Bag filters are filters made of non-woven fabric formed
into pockets, which are fixed in a metal frame.
Bag filters are 300mm (G4 and M5) and 500mm (F7 and
F9) long. The frame is 25mm long. Depending on the
class, the bag filters have the appropriate number of bags.
G4 and M5 bag filters
The G4/M5 bag filters are designed for air pre-treatment.
They are mounted in straight SR type guides. Self-adhe-
sive seals for sealing are mounted on the walls of the air
handling unit housing at the point of filter adhesion and
between frames, if there are more filters.
G4/M5 bag filters are not to be regenerated and he be
replaced with new ones.
The dimensions of the filters used are specified in the KT
certificate.
F7 and F9 bag filters
The F7/F9 bag filters are designed for secondary air treat-
ment.
The filters are mounted in guides with seals and a slat clamp
that is locked on an eccentric connection mechanism (Fig. 29).
Separators from the metal section with seals are mounted
between the filters.
When replacing the filters, it is recommended to replace the
self-adhesive seal fixed inside the guide.
F7/F9 bag filters are not to be regenerated and he be repla-
ced with new ones.
The dimensions of the filters used are specified in the KT
certificate.
Table 14. Dimensions and quantities of bag filters
Size
EVO W H pcs Size
EVO W H pcs
[mm] - [mm] -
5100 600 350 1 0600 597 650 2
3200 422 350 2 0700 697 650 2
0300 422 450 2 5800 697 800 2
0400 547 450 2 0010 797 797 2
2500 597 550 2 5310 562 1050 3
5610 629 1050 3
Mounting of F7/F9 bag and minipleat filters in guides.
Fig. 29 Installation of class F7/F9 bag and minipleat filter
1. Pull the slider towards you, lock the sliders of the guides
(mandrel Ø4x40).
2. Fold the filter bags. This prevents the bags from getting
caught in the guide elements.
3. Slide the filters into the guide using sealing separators.
4. Remove the guide locks.
5. Push the filter and slide the slider as far as it will go.
The factory transport safety devices sho-
uld be removed when the unit is seated at
the destination.