Klimor EVO-S COMPACT, Operation And Maintenance Manual, Page: 37 / 88

35
Fig. 7 Securing the control panel during vertical transport in case of a frame with centre bar
Fig. 8 Securing the unit during vertical transport in case of foundation corners at the ends
of the block
Fig. 9 Securing the unit during vertical transport in case of foundation corners at the ends
of the block
Fig. 10 Securing the control panel during vertical transport in case of foundation cor-
ners in the middle of the block
Fig. 11 Securing the control unit with transport bracket
In the unit’s frame and in the foundation corners, Ø50 ho-
les are made to guide the traverse pipe DN40 or to attach it
with hooks and lift it on the belts.
If, despite the use of traverse and pipes for lifting the con-
trol unit, the belts continue to touch its upper edge, use the
transport brackets Fig. No. 11.
During horizontal transport, the air handling unit set must
be fixed in such a way that it does not move in case of sud-
den movement.
The units are protected with a polyethylene foil for trans-
port, which must be removed immediately after placing the
units in a closed room. Leaving the foiled equipment outsi-
de may result in deterioration of the quality of the galvani-
zed sheet surface (the so-called zinc white), which results in
the loss of warranty.
When transporting vertically, no parts of the
units that are screwed to each other may be
moved, only the monoblocks.