KKT chillers cBoxX 100 Operating Instructions Manual Download Page 62 | Manualshive

Page: 62 / 97

KKT chillers cBoxX 100 Operating Instructions Manual Download Page 62

62 / 97

83000102.Ko

12.

Recycling

All parts (e.g. refrigerant, oil, glycol, metal, electronics, battery etc.) must be recycled, reused or disposed of.
Please note and follow all local and national regulations and if necessary contact your local waste
management agency.

A specialised disposal company must be contracted to dispose of these wastes. They issue a proof of disposal
which must be archived. The chiller can be returned to KKT chillers for disposal. Please contact our KKT
chillers Service Team for details (

Contact

details

).

13.

Products, solutions and services

Apart from the Compact-Line, KKT chillers also offers other products, solutions and services which are not
described in this document. For more information, visit our homepage

http://www.kkt-chillers.com

or contact

your KKT chillers contact– we look forward to hearing from you!

ATTENTION! Dismantling must be carried out by professional and qualified
technicians.
Water and refrigerant pipes are pressurised!
They must also be familiar with the local regulations.

«
...
60
61
62
63
64
...
»

Summary of Contents for cBoxX 100


































































































Reviews:

No comments