44 / 97
83000102.Ko
5.3.
Unpacking
Remove all straps, films, corner protectors and spacers carefully. Optional accessories may be located under
the film. Ensure that they are not damaged.
The packaging can be recycled according to the local regulations. Refer to the following table for details of
the packaging materials used:
Table 10: Material of packaging
5.4.
Storage
If the chiller is stored for more than one month, it should remain in the transport packaging or be repacked.
The following conditions must be noted for storage:
Avoid direct sunlight and moisture
Ambient temperatures 30°C to 50°C
To avoid frost damage the cold water circuit must be completely drained before the chiller is placed in
storage and then flushed with a mixture of water and anti-freeze (see
Chapter 11.1 Draining
).
ATTENTION! Packing straps are mechanically stressed and can snap back when cut.
Risk of injuries!
Element
Material
Recycling code
Polystyrene corner protectors
Polystyrene
Stretch film
Polyethylene
Edge protection / corner
protectors
Cardboard
Packaging tape
Polypropylene
Strapping seals
Steel, galvanized
Wooden pallet
Untreated raw wood, spruce or pine without
bark
