25 / 97
83000102.Ko
Figure 4: Machine base (foot) - outside view
Figure 5: Machine base (foot) - mounting on the
baseplate
Figure 6: Seismic feets are used for seismic and high wind gust regions
3.8.
Filter assembly group coolant circuit (accessories)
The water filter protects the cold water circuit against dirt. The set, consisting of a filter, fitting and two shut
off valves, is enclosed with the chiller in a separate pack and must be fitted onto the cold water inlet of the
chiller from the outside when the chiller is installed.
3.9.
Anybus-Gateway (accessories)
A Modbus TCP communication is already included on the display pcb as a standard feature. An Anybus
gateway is not required.
3.10.
Remote control panel (accessories)
In the event that the chiller shall be operated not from the machine itself but from a different operating
location, the chiller can be delivered with a remote control panel. Thereby the same display that is already
installed in the chiller is mounted together with a rail to the operating voltage supply in one miniature housing.
The remote control panel can be connected to the chiller via the RS485 interface and takes over the complete
function of the controller in the main device. By setting the accordant bridge in the control cabinet cabinet of
the main device, the required operating place can be chosen.
3.11.
Special languages (accessories)
These instruction manuals are provided in German, English, French and Spanish. Other languages are
available on request.
