![background image](http://html.mh-extra.com/html/kitchenaid/architect-series-ii-ykers308x/architect-series-ii-ykers308x_use-and-care-manual_198059014.webp)
14
Setting Oven Controls
Fig. 1
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a factory preset built-in 12 Hour
Energy Saving feature that will turn off the oven if the oven
is left on for more than 12 hours. The control may be
programmed to override this feature to continuously bake.
Example To change between continuous bake
or 12-Hour Energy saving feature:
1. Press and hold
Timer Set/Off
keypad for 6 seconds.
2. Press
Self Clean
to toggle between 12 Hour OFF
(Fig. 4) or Stay On (Fig. 5) feature.
3. Press
START
to accept choice.
Fig. 4
Fig. 5
Setting Clock
When the appliance is first powered up, 12:00 will flash in
the display (See Fig. 1). The time of day must first be set
before operating the oven.
Fig. 2
Fig. 3
Example To set the clock to 1:30:
1. Press
Clock Set/Start
keypad.
2. Enter
1 3 0
using numeric keypads.
3. Press
START
.
Important note:
The clock cannot be changed when a Cook Time or Delay
Start feature is active.
Setting Timer
The minute timer allows you to track your cooking times
without interfering with the cooking process. The timer may
be set from 1 minute up to 11 hours and 59 minutes.
Example To set the timer for 5 minutes:
1. Press
Timer Set/Off
keypad.
2. Enter
5
using numeric keypad.
3. Press
START
keypad to start timer.
To cancel the timer when active press
Timer Set/Off
keypad again.
Important notes:
The timer does not start or stop the cooking process. It
serves as an extra minute timer in the kitchen that will
beep when the set time has run out. The timer may be
used alone or while using any of the other oven functions.
The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has
less than 1 minute remaining only seconds will display.
When the timer is active during a cooking process, the
minute timer will show in the display. To view the
information of any other active oven function, press the
keypad once for the other function to view the status.
Setting 12 or 24 hour display mode
The clock display mode allows you to choose between 12
or 24 hr modes. The factory preset clock display mode is
12 hours.
Example To set 12 or 24 hour display mode:
1. Press and hold
Clock Set/Start
keypad for 6 seconds.
2. Press
Self Clean
keypad to toggle between 12 Hr
day or 24 Hr day display modes (See Figs. 2 & 3).
3. Press
START
to accept choice.
Summary of Contents for Architect Series II YKERS308X
Page 1: ...Models Modèles YKERS308X W10336758A 316902703 ...
Page 36: ......
Page 37: ...Models Modèles YKERS308X W10336758A 316902703 ...