Automatic Starter Kill (ASK).
The 825K can be programmed to auto immobilize
the starter 30 seconds after you turn off the ignition.
See line 10 on page 12.
Doors may be remotely locked or unlocked
without arming or disarming
the
security system. This allows your 825K to function as a normal keyless entry
system.
While disarmed with the Ignition ON
, pressing the button can
unlock
the doors, but it will not lock. Alternatively, pressing the button
in
Valet Mode
(see page 10)
allows you to lock and unlock with the Ignition
ON or OFF.
2-Step Door Unlock .
The 825K can be installed (optional parts required) to
provide the added security of unlocking
only the driver’s door
when you press
the button and disarm the system. If you then press and hold the for
more than 2 seconds, all other doors will unlock. Consult your SciBorg dealer
for details about having this option installed.
NOTE: You can program the 825K to automatically lock or unlock the doors
when the ignition is turned ON or OFF. See line 11 on page 12 for details.
Door Lock/Unlock Only
To remote start your vehicle’s engine
, press and hold the
button for
more than 2 seconds. The hazard/parking lights will then flash 3 times and
the LCD pager will play a melody alert; and shortly after, the
icon will
appear, indicating the 825K is preparing to start the engine. After several
seconds, if the engine start sequence is successful, the pager will display the
icon and the preset engine run-time and another melody will play.
NOTE:
Vehicle hazard/parking lights flash during the entire remote start se-
quence for safety. This feature cannot be disabled.
Remote Engine Shutdown.
When you wish to end a remote start sequence
and shut down your engine, simply press the
button once. The engine
will stop and the
icon will disappear from the pager’s LCD. The hazard/
parking lights will flash 4 times, and the pager will play a melody.
Keep Engine Running.
If you wish to drive your vehicle after the engine has
been remote started, first ensure the system is disarmed and then turn on the
ignition with your key and step on the brake. Pressing the brake causes the
825K to end the remote start sequence and hand over engine control to the
vehicle’s ignition key-switch. If you later turn off the ignition with your key,
the engine will then shut down as usual.
To keep your engine from shutting
down after you remove the ignition key, see “Keyless Idling” on page 6.
Remote Start
SYSTEM OPERATION
