manualshive.com logo in svg

Kipp & Zonen RaZON+, Instruction Manual

Share
Download
Kipp & Zonen RaZON+ Instruction Manual Download Page 70

70

Logging file examples

Example of a logged ASCII data file over RS-485 and terminal program:

.status=0;700;RaZON150002;SMP10 130004;SHP1110001;2016-08-01;13:00:00;208.99;36.94;51.997000;4.386300;1013.25;-0.40;-0.20; 
-0.50;27.8;25.9;0.000;0.002;60;0;0;0;0;1;0xD0B3;
.status=0;700;RaZON150002;SMP10 130004;SHP1110001;2016-08-01;13:01:00;209.36;37.01;51.997000;4.386300;1013.25;-0.00;-0.10;
-0.10;27.8;26.0;0.000;0.002;60;0;0;0;0;1;0x6D06;
.status=0;700;RaZON150002;SMP10 130004;SHP1110001;2016-08-01;13:02:00;209.74;37.09;51.997000;4.386300;1013.25;-0.50;-0.20;
-0.60;27.9;26.0;0.000;0.002;60;0;0;0;0;1;0x3FAC;
.status=0;700;RaZON150002;SMP10 130004;SHP1110001;2016-08-01;13:03:00;210.11;37.16;51.997000;4.386300;1013.25;-0.50;-0.10;
-0.60;27.9;26.0;0.000;0.002;60;0;0;0;0;1;0xB55C;

Example of a log information as downloaded over the web interface.

sep=,
SystemName: RaZON150002
Serialnumber: 150002

Date (dd-mm-yyyy), Time (hh:mm:ss), SolarAzimuth (Degrees), SolarZenith (Degrees), Latitude (Degrees), Longitude (Degrees), AirPressure 
(mBar), IrrDiffuse (W/m2),TempDiffuse (Degrees celcius), IrrDirect (W/m2), TempDirect (Degrees celcius), IrrGlobal (W/m2), Sunshine 
(number of seconds in this interval), SunshineDuration (hours of today), GlobalSum (KWh/m2)

2016-07-18,00:00:00,2.7631,106.9831,51.9969,4.3856,1014.58,-6.4,19.7,-0.6,17.1,-6.4,0.0,3.2569,4.0334
2016-07-18,00:01:00,3.0070,106.9755,51.9969,4.3856,1014.58,-6.4,19.7,-0.6,17.1,-6.4,0.0,0.0000,-0.0001
2016-07-18,00:02:00,3.2509,106.9672,51.9969,4.3856,1014.58,-6.5,19.7,-0.6,17.0,-6.5,0.0,0.0000,-0.0002
2016-07-18,00:03:00,3.4948,106.9583,51.9969,4.3856,1014.58,-6.5,19.7,-0.6,17.0,-6.5,0.0,0.0000,-0.0003
2016-07-18,00:04:00,3.7386,106.9487,51.9969,4.3856,1014.58,-6.6,19.7,-0.6,17.0,-6.6,0.0,0.0000,-0.0004
2016-07-18,00:05:00,3.9824,106.9385,51.9969,4.3856,1014.58,-6.6,19.7,-0.6,17.0,-6.6,0.0,0.0000,-0.0005

Summary of Contents for RaZON+









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands