Kipp & Zonen RaZON+, Instruction Manual

Page: 25 / 72

25
3.10 Shading assembly mounting
The shading assembly needs to be completed with the two sections of the long rod as indicated above.
First mount the section with the 2 screws as indicated on the left. Then mount the top section with the shading disc.
The standard RaZON
+
with the PR1 is supplied with the short section and small shading disc.
Optionally when the RaZON
+
is ordered with an SMP10 (or higher) pyranometer, a long section with larger shading disc is supplied.
The mounting of both sections is identical.
The 2 different end sections of the long arm with shading discs is shown below.
The shading disc fits only in one way and is fastened with a screw.
When the RaZON
+
is operational, the disc should always cast a shadow on the glass dome of the pyranometer (only visible with
cloudless sky).