![Kipor Sinemaster IG2000i Operation Manual Download Page 82](http://html1.mh-extra.com/html/kipor/sinemaster-ig2000i/sinemaster-ig2000i_operation-manual_1971741082.webp)
26
7.5 Spark arrester service (See figure 30)
Figure 30 Dismantle the spark arrester
The muffler is very hot after the generator is just stopped.
Service the generator when the muffler is cooled down.
In order to ensure the performance of spark arrester,
service the spark arrester once every 100hrs.
1. Remove the rear cover
2. Dismantle the spark arrester from the exhaust end.
3. Wipe off the carbon deposition with a carbon brush.
Check if there is any broken hole of crack on the arrester
net, replace the net as necessary.
4. Reassemble the spark arrester.
5. Reassemble the rear cover.
Summary of Contents for Sinemaster IG2000i
