Kipor Sinemaster IG2000i, Operation Manual, Page: 34 / 90

33
the following instructions will ensure your engine meets the emission control
standards.
Modification
Modification of the emission control system may lead to increased emissions.
Modification is defined as the following:
Disassemble or modify the function or parts of the intake, fuel or
exhaust system.
Modify or destroy the speed governing function of the generator.
Engine faults that may affect emission
Any of the following faults must be repaired immediately. Consult with your
authorized Kipor service center for diagnosis and repair:
Hard starting or shut down after starting
Unstable idle speed
Shut down or backfire after applying an electrical load
Backfire.
Black smoke and/or excessive fuel consumption
Replacement parts and accessories
The parts making up the emission control system applied to Kipor engine have been
specifically approved and certified by the regulatory agencies. You can trust the
replacement parts supplied by Kipor have been manufactured to the same
production standard as the original parts. The use of replacement parts or
accessories which are not designed by Kipor may affect the engine emission
performance. The manufacturers of replacement parts and accessories have the
responsibility to guarantee that their replacement products will not adversely affect
emission performance.
Maintenance
Maintain the generator according to the maintenance schedule in this section.
Service items more frequently when used in dusty areas, or under conditions of high
load, temperature, and humidity.
Air Quality Index (only for California certified models)
CARB requires that an air quality index label be attached to every certified engine
showing the engine emission information for the emission duration period. The label
is provided for the user to compare the emission performance of different engines.