Kipor Sinemaster IG2000i, Operation Manual

Page: 32 / 90

31
Shut off the generator:
1. Turn off the power switch of the electrical equipment; pull the plug out of the
parallel receptacle.
2. Shut off the two generators.
3. If two generators parallel are not used, be sure to remove the cable from
PARALLEL OUTPUT.
Kipor IG2000i parallel cable is only suitable for two KIPOR IG2000i generators
being run simultaneously.
Always use Kipor parallel output cable on IG2000i.
When using the parallel cable, safely insert the plug into the receptacle.
When running two generators in parallel, DO USE the receptacle of parallel
cable for power output, Do not use the receptacle on the control panel.
Before starting the generator, connect the parallel output cable, after the
generators stopped, disconnect the parallel output cable. Never connect or
disconnect the parallel output cable when the generators are running.
If the parallel output cable is still connected when one generator has stopped
running, stop the running generator and remove the parallel box.
If only one generator is operated, make sure the parallel output cable is
disconnected.
When the two generators are running separately, make sure the parallel output
cable is disconnected.
Before operating the generator, read the manual carefully.