29
Procedures to run 2 generators with a
parallel box:
1. Prepare two KIPOR IG2000 I digital
generators.
Figure 2
Note:
Be sure the two generators are shut off.
2. Insert the connecting plug
②
of the parallel cable
①
to PARALLEL OUTPUT
receptacle
③
on the controller panel of each generator
（
See figure 3
）
3. Connect the grounding terminal
④
of the parallel cable to the grounding terminal
⑤
of each generator
（
See figure 3
）
Figure 3
Be sure all the electrical equipment is grounded. See
⑧
.
Be sure each generator is on a stable level surface.
4. Start the two generators:
The start procedure is the same as normal start procedure. (Refer to the section
introducing how to start the engine in this manual)
Summary of Contents for Sinemaster IG2000i
