Kipor Sinemaster IG2000i, Operation Manual

Page: 72 / 90

16
rubber sheathed flexible cable (IEC 245 or equivalent).
Keep the generator away from other electric cables or
wires such as commercial power supply lines.
If you use AC receptacle at the same time, be sure not to
exceed the AC total power .
Electrical equipment (including lines and plug
connections) should not be defective.
5.1 AC applications
1. Start the engine and make sure the output indicator light (green) comes on.
2. Confirm the connected appliance is switched off, and insert the appliance plug to
the generator receptacle. (See figure 15)
Figure 15 Connection of appliance and generator
Be sure that all appliances are in good working order
before connecting them to the generator. If an appliance
begins to operate abnormally, becomes sluggish, or
stops suddenly, turn off the generator engine switch
immediately. Then disconnect the appliance, and
examine it for signs of malfunction.
Before connecting an appliance to the generator, check
that it is in good order, and that its electrical rating does
not exceed that of the generator. Then connect the power
cord of the appliance, and start the engine.