39
10. TRANSPORTING and STORAGE
To prevent fuel spillage when transporting or during temporary storage, the
generator should be secured upright in its normal operating position with the engine
switch placed in the OFF position.
When transporting the generator:
■
If you must transport the generator in a vehicle, drain all fuel from the generator.
■
Do not operate the generator while it is on or in a vehicle. Take the generator out
of the vehicle and use it in a well ventilated area.
■
Avoid a storage area exposed to direct sunlight when putting the generator on a
vehicle. If the generator is left in an enclosed vehicle for many hours, high
temperature inside the vehicle could cause residual fuel to vaporize resulting in
a possible explosion.
■
Do not drive on a rough road for an extended period with the generator on
board.
Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.
■
Gasoline is extremely flammable and explosive under certain conditions.
■
Do not smoke or allow flames or sparks in the area.
Summary of Contents for Sinemaster IG2000i
