Kingsman Marquis Serenity MQZDV1917, Installation Instructions Manual

Page: 20 / 50

Fan Installation
For new installations, it is recommended that the Fan Kit be installed prior to framing the fireplace.
This can be accomplished by utilizing the Fan Access Cover shown in Figure 18.
CAUTION: DO NOT ATTACH 120V FAN ASSEMBLY TO MILLIVOLT GAS VALVE SYSTEM.
Figure 18 - Optional Fan Kit installation.
1. Remove the Fan Access Cover mounting screws. Make note of how the Cover Edge is posi-
tioned on the inside of the unit rather than the outside.
2. Slide the MQFK19 fan assembly into the fireplace cavity. Position the three [3] rubber pads on
the fan kit on the three [3] Fan Location Tabs inside the fireplace unit. Set the fan assembly
down securely on those location tabs.
3. For the TERMINALS B connection, there are two [2] options: 1) to have the thermal switch
controlling the fan directly, simply connect the TERMINAL B wires to the thermal switch
(Thermodisc) terminals. 2) To have a unit-mount variable control controlling the fan speed in
conjunction with thermal switching, simply connect the TERMINALS B wires to both the
Thermodisc and variable control switch in series (see Figure 19).
4. Install a power receptacle in the junction box provided. Connect the fan’s power cord to that
receptacle.
5. Replace the Fan Access Cover ensuring that the Cover Edge is positioned inside the cavity of
the fireplace.
1. Turn the fireplace ON. The thermal switch should engage when its designed threshold tem-
perature is reached. This should take approximately 10 to 15 minutes. The fan will automati-
cally shut off when the temperature of the fireplace cools down.
2. If a variable control is installed, turn the knob clockwise to switch on the fan. Turn the knob
fully counter-clockwise will switch the fan off.
Procedures for New Installations
Fan Testing Procedures
20