CENTAURI ENERGY SERVER
User Manual - Model 30-2017/12/18-VERSION 1.0
5
Safety Precautions
Please comply with the following items for safe use:
o
This system uses special power supply units, therefore its installation and maintenance must
be done only by authorized technicians.
o
During the installation of the Server, the distance between the equipment and wall must be at
least 300 mm for ventilation and heat dissipation from the system.
o
The temperature of the surface of the cabinet may rise to approximately 50
̊
C, therefore care
must be taken always before touching the surface to prevent injuries.
o
Since the storage is external, care must be taken to ensure that the voltage of the storage
bank meets the requirements of the rated voltage of the Server. Under no circumstances
should a storage bank be connected to the Server with different DC voltage settings than
those required by the Server.
o
Do not open the cabinet of the Server, otherwise it will cause an electric shock. The internal
inspection and maintenance should be conducted only by authorized technicians.
o
After the machine is turned off, its voltage may still be high for a long time, do not open
the cabinet to prevent electric shocks.
o
The “Manual Bypass” switch is used for maintenance and repair of the Server, which can be
performed only by authorized technicians.
o
This system is provided with multiple PV inputs, therefore it should be connected with
the independent loop, without the electrode grounded.
o
The "EPO" button on the panel is used for emergency stop power supply (power off) of the
Server, please pay attention to its operation.
o
The internal short circuit of the Server may lead to the risk of an electric shock or a fire,
therefore, under no circumstances should any form of liquid be placed on the product to
prevent electric shock or other hazards.
o
If the Server malfunctions, please cut off the power supply quickly and contact an
authorized technician.
o
Do not store or use the Server in the following locations:
Outdoor;
Without cross-ventilation or are dusty;
Near combustible gas or corrosive substances;
With unusually high or low temperatures (±40
℃
) or with high
humidity (>90%);
In direct sunlight or near heating appliances;
o
Please install and use dry powder fire extinguishers. Under no circumstances should a liquid fire
extinguisher ever be used.
o
The external power switch should be installed near the Server so that the power
supply can be cut
off in an emergency.
Warning!
1.
The Server must be reliably grounded when it is connected to the AC load.
2.
Improper operation can be harmful and cause substantial loss, therefore, please follow
instructions and ensure that only authorized technicians work with the Server.
