CENTAURI ENERGY SERVER
User Manual - Model 30-2017/12/18-VERSION 1.0
21
Fig 6 Signal Interface of Remote Control
The output signal interface (dry contact) belongs to 3Pin interface, therefore the
user can choose the "normally open" mode or "normally closed" mode (as shown in
the following figure) according to the demand of the site.
Pin 1 for normally open contact
Pin 2 for common port
Pin 3 for normally closed contact
Fig 7 Signal Interface of Output Dry Contac
t
3.
Operating Instructions
Note 1: All buttons for the user operation involved in the operation steps and LED
display are shown in the "Product Profile".
Note 2: Before conducting any operation step described in this chapter, please carefully
read the instructions to avoid personnel injury or equipment damage caused by
improper operation.
3.1
Daily ON/OFF
(Click “
” button or press the “INV ON / INV OFF” button on the panel for
the ON/OFF operation.)
Notes
This step is used to boot the Server under the complete power-down condition, namely the
loads are powered through the maintenance bypass switch or not powered by the
Server
before booting the Server. It is assumed that the Server is installed and has passed the
debugging by the engineers, as well as the external power switch has been closed.
