Kilowatt Labs 30-2012, User Manual

Page: 15 / 34

CENTAURI ENERGY SERVER User Manual - Model 30-2017/12/18-VERSION 1.0
15
Charging current Factory settings of 0.15C10: The user can set it for 0.07-0.3
Settings C10.
Automatic conversion between even charging and floating
charging; Automatic temperature compensation of the
Intelligent battery battery pack (If the system is not connected with the
management detection line for the battery temperature, the
temperature compensation is based on the ambient
temperature)
Depth of discharge
setting for off-peak 330Vdc-378Vdc (The user can set it)
discharging
Server / bypass
0ms
Conversion conversion time
time Bypass/Server
0ms
conversion time
Remote control input
Battery self-check, Server ON/OFF, fault clear, emergency
stop
Communication
Computer
RS232, RS485 and SNMP(Option)
monitoring port
interface
Dry contact output Bypass input fault, rectifier input fault, system fault, system
12Vdc/250Vac 1A alarm, battery low voltage, output overload, fan fault and
max generator ON/OFF.
Operating
0~40
℃
temperature
Environment
Maximum relative
90% (Non-condensing)
humidity
Maximum altitude
Rated power per 100m (1% reduced by rising 100m)
Maximum 4000m
Cooling Forced ventilation (fan speed varies with load)
Noise (The value
changes with the
different load and
temperature at the 60
place 1 meter
away from the
equipment) dB
Others
Mean time
between failures 200,000 hours
(MTBF)
Protection grade
IP20
(EN60529)
Incoming line way Lower wiring pattern
Standards IEC62040-1-1
、
EN62109-1:2010, EN62109-2:2011,
Dimensions (W*D*H) 600mm*700 mm *1750 mm
Packing (W*D*H) 690mm*790 mm *1850 mm
Weight 250 280 300 320 345 360
Table 11 Specifications of Product