Kikusui PBZ20-20, User Manual

Page: 102 / 170

102
PBZ
Editing Programs and Steps
Editing Steps
This section will explain how to edit the steps for the program number that was selected
through the procedure given on “Editing Programs” on page 100.
The step editing screen contains five pages (page 1/5 to page 5/5). You can edit these pages
in any order that you want. To select the page you want to edit, use the up and down cursor
keys to move through the settings. You can use a total of 1024 steps in PRG.01 to PRG.16.
p. 106
First, select the page to edit on the editing screen. Then, select the setting to edit in the page.
The STEP and TIME settings can be edited from any page.
Selecting the step editing page
1
Use the up and down cursor keys to select a step editing page.
To move between pages on the step editing screen, repeatedly press the up or down
cursor key (in the direction that you want to move). When the cursor is on the first or
last setting on the page and you press the appropriate cursor key, the page will switch
to the previous or next page, respectively.
Selecting and specifying the step number
1
Use the up and down cursor keys to select STEP.
If there are steps already in the program, the cursor moves to the step number.
If there are no steps in the program, “END” is displayed, and the cursor moves to
“END.” If “END” is displayed, the number of steps in the program is 0000.
See
Page 1/5
Page 3/5
Page 2/5
Page 4/5
Page 5/5
Total number of steps
in the program
The number of the selected step