Kikusui PBZ20-20, User Manual

Page: 40 / 170

40
PBZ
Selecting a Signal Source
When you use the PBZ, you can select both internal and external signal sources. The types
of internal and external signal sources are as follows:
Signal Source Combinations
p. 87
The different signal source combinations are shown on the recto side. Use to
select the signal source.
When you combine signal sources, if the signal sources change in opposite directions at the
same time, glitches may be produced because of the differences in the responses of the
signal sources.
Internal signal sources External signal sources
• DC signal (DC or FINE) • Internal signal source’s DC signal (DC) that
is controlled using a control signal (applied
to the J1 connector)
• AC signal (AC) • The input signal that is applied to EXT SIG
IN (BNC terminal)
DC
FINE
AC ON/OFF
FUNC
AMPL
AC FREQ
PHASE
DUTY
SWEEP
BNC
SELECT
EXT SELECT
• BNC
• J1
• BNC+J1
• INT
• EXT
• ADD(INT+EXT)
EXT SIG IN
(BNC terminal)
Internal signal source
Amplifier Output
EXT GAIN
J1
Control signal
J1
External signal
source
DC
EXT
INT
CONFIG CONFIG
CONFIG CONFIG
See
CONFIG
+V
0
+V
-V
0
+V
-V
0
DC
AC
OUTPUT