Kikusui PBZ20-20, User Manual

Page: 100 / 170

100
PBZ
Editing Programs and Steps
Editing Programs
You can edit the SELECT, TITLE, POLARITY, MODE, and LOOP settings in any order that
you want. Use the up and down cursor keys to select a setting.
p. 86
Match the POLARITY (bipolar/unipolar mode) and MODE (CV/CC mode) settings to the
operation modes that you have used to specify.
Starting the editing of a program
1
Press EDIT (SHIFT + RUN/PAUSE).
The program editing screen appears.
The selected program’s TITLE (program name), POLARITY (bipolar/unipolar mode),
MODE (CV/CC mode), LOOP (the number of times the program will repeat), and STEP
(the number of steps that the program contains) settings are displayed. Sample
programs have specific titles (program names), but all other programs are named
“UNTITLED.”
Selecting the program number
1
Use the up and down cursor keys to select SELECT.
2
Turn the rotary knob to select the number of the program that you want
to edit.
The selectable range of program numbers is from 1 to 16. If you fix the number that
you specified using the rotary knob, the number is confirmed.
Entering the program name (changing characters)
1
Use the up and down cursor keys to select TITLE.
2
Use the left and right cursor keys to select the character that you want to
change.
3
Turn the rotary knob to select the character.
Item Input range Description Factory default
setting
SELECT PRG.01 to PRG.16 Program number. 1
TITLE Up to 15 characters
ASCII codes 0x20 to 0x7E Program name. UNTITLED
POLARITY BIPOLAR or UNIPOLAR Bipolar/unipolar mode. Bipolar mode
MODE CV or CC CV/CC mode. CV
LOOP
1 to 10000 or
∞
The number of times that the
program will repeat. If you
specify
∞
, the program will
repeat infinitely.
1
See
CONFIG