Kikusui KJM6335, Operation Manual, Page: 93 / 129

KJM6335 GPIB Operation 4-35
SYMmetry:OFFSet:LEVel
Sets the symmetry offset/slice level.
This message is valid only when SYMMETRY mode is set to
OFFSET or MANUAL. Whether a set value is reflected in
symmetry offset level or slice level depends on the SYMMETRY
mode.
Even when the instrument reverts from the remote status achieved
using GPIB to control from the front panel (local status), this level
set-value will be retained until the SYMMETRY LEVEL variable
resistor is operated.
■
Program message
SYM:OFFS:LEV
Space
Symmetry offset/
slice level
■
Program data
Setting the symmetry offset/slice level
Data type Integer
Minimum -2048
Maximum 2047
Resolution 1
Table 4-20
SYMMETRY
AUTO OFFSET
-2048 2047
In panel operations, turning the SYMMETRY LEVEL variable
resistor clockwise means setting an offset level in the direction of
2047. Turning it counterclockwise means setting it in the direction
of -2048.
e.g.: To set the SYMMETRY offset level to "0".
SYM:OFFS:LEV 0