Kikusui KJM6335, Operation Manual, Page: 100 / 129

4-42 GPIB Operation KJM6335
About Status Register
The format of status data is shown below.
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
＆
0 0 CME EXE 0 0 UIS IMR
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Bit7
Bit6
Bit5
Bit4 Bit3 Bit2 Bit1 Bit0
UIS IMR CME EXE
0 ESB 0 0 0 0 0
RQS
MSS
Event status register
Run *ESR? to read.
OR
Event status enable register
Run *ESE<hex> to set,
and *ESE? to read.
Read by serial polling.
Status byte register
Run *STB? to read.
Service request enable register
Run *SRE<hex> to set,
and *SRE? to read.
OR
Service request
Fig. 4-2 Status Data Format
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
NOTE
• The individual bits of the status byte register and the
service request enable register are set when they are 1 and
are reset when they are 0.
• *CLS resets the status byte register.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○