Kikusui KJM6335, Operation Manual, Page: 67 / 129

KJM6335 GPIB Operation 4-9
*SRE
Sets or resets the individual bits of the service request enable
register. Bit 6, however, cannot be set.
■
Program message
*SRE
Data
Space
■
Program data
Service request enable register set/reset
Minimum
0h
Maximum FFh
Resolution
1h
Data type Hex
Table 4-2
e.g.: To set ESB bit of the service request enable register.
*SRE #H20
■
Response message
*SRE? ... Returns the contents of the service request enable
register. The contents of the register will not be cleared
if they are read out. They will not be cleared even it
they are read with the *RST or *CLS message.
e.g.: When the data is 20h.
A value of #H20 is returned.