Kikusui KJM6335, Operation Manual, Page: 27 / 129

KJM6335 Names and Functions of Controls 2-7
10 METER SCALE
• METER SCALE / %/ns key
Used to switch to full scale of the meter.
When the unit is %, the maximum value on the scale changes
between 10 % and 20 % each time this key is pressed. When the
unit is ns, the maximum value on the scale changes to 1.5 ns, 5 ns,
15 ns, and 50 ns in sequence each time the key is pressed.
Pressing this key with the 15 SHIFT key held down causes the
unit to be switched between % and ns.
• METER SCALE LEDs
The selected scale status is indicated by an LED to the left of the
METER SCALE / %/ns key.
11 INHIBIT INPUT
• INHIBIT INPUT / POLARITY key
Used for on/off setting of the inhibit function.
It is ON while the LED on the key is lit, and OFF while the key is
not lit.
Pressing this key with the 15 SHIFT key held down causes
polarity of the inhibit function to be switched.
• INHIBIT INPUT LEDs
The selected polarity is indicated by an LED to the left of the key.
• INHIBIT INPUT terminal
This BNC terminal is used to input an RF signal.
The maximum input voltage is 10 Vpeak (DC + AC).
For details, see 3.5 "Inhibit Function".