Kikusui KJM6335, Operation Manual, Page: 31 / 129

KJM6335 Names and Functions of Controls 2-11
17 CLOCK
• CLOCK TRIG EDGE key
Used to switch the trigger edge of a clock signal.
Pressing the key switches the trigger edge between rising edge (
)
and falling ( ) setting.
• CLOCK TRIG EDGE LEDs
The set trigger edge status is indicated by the LED to the left of the
CLOCK TRIG EDGE key.
• CLOCK IMPEDANCE key
Used to switch the input impedance of a clock signal.
Pressing the key switches the input impedance between 50
Ω and 1
M Ω .
• CLOCK IMPEDANCE LEDs
The set input impedance is indicated by the LED to the left of the
CLOCK IMPEDANCE key.
• CLOCK INPUT terminal
This BNC terminal is used to input a clock signal.
The maximum input voltage is 4 Vpeak (DC + AC).